1. INSTALLATION
1.1 Check and make sure that the following
accessories are included:
This operation manual
Indicator x 1
Platform x 1
Pillar x 1
Power adaptor x 1
Screws and tool set x 1
Contact your dealer if any item missed.
1.2 Install the scale very carefully. Refer
to Appendix INSTALLATION DIAGRAM for
installation method and procedures.
Should you encounter any problem in
installation, contact your dealer.
1.3 Power on the scale
a. Before plugging the power adaptor into
electricity outlet, check and make sure
that the input voltage of power adaptor
matches with the output voltage of the
outlet. If not, do not plug in the adaptor,
contact your dealer immediately.
b. Before first time use, plug the main
adaptor into the wall outlet and charge
the scale for at least 8 hours.
c. Retain the packing materials for future
transportation purposes.
Caution:
In most cases, this unit is legal for trade
only when it is sealed and bearing a serial
number. Do not attempt to break the seal or
remove the serial number. Contact your dealer
for more information or after sales service.
To Next Page
Loading...
