V-Tec DT243-D4 - Entrance Playback; No Disturb Function

-5-
8. No Disturb Function
If you don't want to be disturbed,for example,at night. Activating the mute function is
necessary for you.
When the monitor is in standby mode, press Menu button to enter main menu page.
Use / button to move upward / downward to select Don't Disturb item, press
Menu button to enter the no disturb page, you have 4 items to select.
Follow the steps:
Monitor By Select
Main Menu
Playback
Don’t Disturb
Intercom Call
Normal
No Disturb
8 H
Always
1 H
Use / button to selete Don't
Disturb item, then press
Menu button to conrm.
Use / button to selete the item
you want, then press Menu
button to conrm.
7. Entrance Playback
When the monitor is in standby mode, press Menu button to enter main menu page.
Use / button to move upward / downward to select Playback item, press Menu
button to conrm, the screen will display the playback page.
*Note: The playback function requires SC6V to support.
*Note: Press No Disturb button on panel in standby mode to enter the no disturb page in
shortcut.