Need help?Do you have a question about the V2 CITY1 and is the answer not in the manual?
General| Brand | V2 |
|---|---|
| Model | CITY1 |
| Category | Control Unit |
| Language | English |
Automation must comply with European regulations for machinery safety.
Connects one or two AC asynchronous motors for gate operation.
Connects photocells for safety detection during gate movement.
Supports two kinds of end-of-stroke detection for gate position.
Enables encoder motors for precise gate positioning and obstacle detection.
Provides an immediate gate stop function for safety.
Details how to access and navigate the configuration menu items.
Explains how to set time-based functions and durations.
Sets the opening duration for Motor 1 and Motor 2.
Sets the closing duration for Motor 1 and Motor 2.
Configures lock time, advance time, and backlash for electric lock release.
Adjusts the power percentage for Motor 1 and Motor 2.
Selects functions associated with the STOP command.
Performs operational test of safety devices before normal operation.
Enables limit switches or encoders for precise gate positioning.
Adjusts sensitivity of the obstacle sensor.
Activates procedure to automatically find best operation time duration.
Finishes programming, saves modified data, and prepares unit for use.
To Next Page
