V2 CITY11 User Manual

ENGLISH
- 7 -
IMPORTANT REMARKS
For any installation problem please contact our Customer Service
atthenumber+39-0172.812411operatingMondaytoFriday
from8:30to12:30andfrom14:00to18:00.
V2 has the right to modify the product without previous
notice; it also declines any responsibility to damage or
injury to people or things caused by improper use or wrong
installation.
m Please read this instruction manual very carefully
before installing and programming your control unit.
• Thisinstructionmanualisonlyforqualiedtechnicians,who
specialize in installations and automations.
• Thecontentsofthisinstructionmanualdonotconcerntheend
user.
• Everyprogrammingand/oreverymaintenanceserviceshould
be done only by qualied technicians.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE
WITH THE EUROPEAN REGULATIONS IN FORCE:
EN 60204-1 (Machinerysafety.electricalequipment
     ofmachines,part1:generalrules)
EN 12445  (Safeuseofautomatedlockingdevices,test
     methods)
EN 12453  (Safeuseofautomatedlockingdevices,
     requirements)
• Theinstallermustprovideforadevice(es.magnetotermical
switch)ensuringtheomnipolarsectioningoftheequipment
fromthepowersupply.Thestandardsrequireaseparationof
thecontactsofatleast3mmineachpole(EN60335-1).
• Aftermakingconnectionsontheterminalboard,useone
hoseclamptoxdangerousvoltagewiresneartheterminal
boardandanotherhoseclamptoxsafetylowvoltagewires
usedforaccessoriesconnection;thisway,incaseofaccidental
detachmentofaconductingwire,dangerousvoltagepartswill
notcomeintocontactwithsafetylowvoltageones.
• TheplasticcasehasanIP55insulation;toconnectexibleor
rigidpipes,usepipettingshavingthesameinsulationlevel.
• Installationrequiresmechanicalandelectricalskills,thereforeit
shallbecarriedoutbyqualiedpersonnelonly,whocanissue
theComplianceCerticateconcerningthewholeinstallation
(EECMachineDirective2006/42/CEE,AnnexIIA).
• Theautomatedvehiculargatesshallcomplywiththefollowing
rules:EN13241-1,EN12453,EN12445aswellasanylocal
ruleinforce.
• Alsotheautomationupstreamelectricsystemshallcomplywith
thelawsandrulesinforceandbecarriedoutworkmanlike.
• Thedoorthrustforceadjustmentshallbemeasuredbymeans
ofapropertoolandadjustedaccordingtothemax.limits,
whichEN12453allows.
• Connecttheearthingleadofthemotorstotheelectricitygrid
earth system.
• Observeallnecessaryprecautions(e.g.anti-staticbracelet)for
handlingpartssensitivetoelectrostaticdischarges.
DECLARATION OF CONFORMITY
V2S.p.A.herebydeclarethatCITY11productsconformtothe
essentialrequirementsestablishedinthefollowingdirectives:
• 2004/108/CEE(EMCDirectiveinaccordancewithstandards
EN61000-6-2,EN61000-6-3+EN50336)
• 2006/95/CEE(LowVoltageDirectiveinaccordancewith
standardsEN60335-1+EN60335-2-103)
• 99/05/CEE(RadioDirectiveinaccordancewithstandard
EN301489-3)
• DirectiveROHS22011/65/CE
Racconigi,12/01/2010
V2S.p.A.legalrepresentative.egaledellaV2S.p.A.
Cosimo De Falco
TECHNICAL SPECIFICATIONS
Powersupply 230V/50Hz 120V/60Hz
Maxmotorsload 700W 700W
Maxaccessoriesload24V 10W 10W
Workingtemperature -20 ÷ +60 °C -20 ÷ +60 °C
Protectionfuse F1 = 5A delayed F1 = 8A delayed
Dimensions 170 x 185 x 70 mm
Weight 1200g
Protection IP55

V2 CITY11 Specifications

General

Brand	V2
Model	CITY11
Category	Control Unit
Language	English

Summary

Important Remarks and Safety

Installation and Programming Guidelines

Manual is for qualified technicians. Read carefully before installation and programming.

Compliance with European Standards

Automation must meet EN 60204-1, EN 12445, EN 12453, EN 13241-1 and local regulations.

Electrical and Physical Safety Measures

Ensure proper power isolation, wiring, IP55 casing, and skilled installation.

Declaration of Conformity

Product Compliance Directives

CITY11 products conform to EMC, Low Voltage, Radio, and RoHS2 directives.

Control Unit Description and Features

Key Control Unit Specifications

Supports dual voltage, two motors, various safety inputs like photocells and edges.

Photocell and Safety Edge Integration

Details on connecting and configuring photocells and safety edges for operation.

Installation and Connections

Power Supply and Motor Wiring

Connect power supply and motor cables as per terminal designations.

Input and Output Terminal Functions

Details on wiring for courtesy light, blinker, electric lock, start, stop, antenna, and receiver.

Electrical Connection Diagram

Terminal Designations and Functions

Explanation of each terminal (A1, A2, L1-L11, K1-K10, N, L) and their purposes.

Adjustment of Power and Operational Times

Trimmer Adjustments

Adjustments for motor power, operating time, pause time, and delay time using trimmers.

Control Unit LED Indicators

Status indication for START, START P, STOP, PHOTO, EDGE, mains, and overload LEDs.

Programming the Operational Logic

Dip-Switch Functions

Detailed explanation of dip-switch settings for pre-flashing, automatic closure, start modes, safety, etc.