ENGLISH
19
PLUG-IN RECEIVER
The control unit is suitable for plugging-in an MR1
series receiver with high sensitivity super-heterodyne
architecture.
m PLEASE NOTE: Disconnect the power to the
control unit before performing the following
operations. Pay the utmost attention to the
direction of insertion of plug-in modules.
The MR1 receiver module has 4 channels, each with
an associated command on the City7 control unit:
• CHANNEL 1
START
• CHANNEL 2
PEDESTRIAN START
• CHANNEL 3
STOP
• CHANNEL 4
COURTESY LIGHTS
m PLEASE NOTE:
Read the instructions supplied with the MR1
receiver thoroughly for details on programming the
4 channels and the operational logic.
EXTERNAL ANTENNA
It is recommended the external antenna be used in
order to guarantee maximum radio capacity.
Connect the antenna hot pole to terminal L1 of the
control unit and the braiding to terminal L2.
To Next Page
Loading...
