ENGLISH
15
DESCRIPTION OF THE CONTROL UNIT
The CITY9 control unit is an innovative V2 product
guaranteeing safety and reliability for sliding gate
automation.
The CITY9 design has been aimed at creating a
product which adapts to suit all needs, thus
obtaining an extremely versatile control unit
satisfying all the necessary requirements for a
functional and efficient installation.
• 230V - 50Hz or 120V - 60Hz power supplies,
depending on the model, 1 x 700 W max.
single phase motor.
• Input for keyswitch or push-button.
• Input for safety photocell.
• Input for safety edge, capable of handling
standard edges with switch normally closed and
conductive rubber edges with nominal resistance
of 8.2 kOhms.
• Inputs for open and close limit switches.
• Pre-opening safety device testing.
• Dip-switch programmable operational logic.
• Adjustment of motor power and operation time
by means of a trimmer.
• Quick plug-in connector for inserting a Mr1
series receiver.
• LED monitoring of inputs.
• Courtesy light output.
• IP55 casing.
TECHNICAL SPECIFICATIONS
230V models 120V models
Power supply 230V / 50Hz 120V / 60Hz
Max motor load 700W 700W
Max accessories load 24V 3W 3W
Working temperature -20 ÷ +60 °C -20 ÷ +60 °C
Protection fuse F1 = 5A delayed F1 = 8A delayed
Dimensions 170 x 185 x 70 mm
Weight 800 g
Protection IP55
To Next Page
