V2 PD5 - START IN PAUSE; THE PHOTOCELL IN PAUSE

ENGLISH
34
START IN PAUSE
This menu permits to select the functions of the
command start during the standstill.
ChiU the command START closes the gate.
no the command START is not available.
mThis function cannot be selected
until the automatic closing has been
activated (menu Ch.AU).
PEDESTRIAN START IN OPENING
This menu permits to select the functions of the
command of START P. during the opening phase.
PAUS the command PEDESTRIAN START stops
the gate and goes in pause.
no the command PEDESTRIAN START is not
available.
ChiU the command PEDESTRIAN START
closes the gate.
THE PHOTOCELL IN PAUSE
This menu permits to determine
the functioning of two photocells
during the pause phase.
rPAU the interruption of the
photocell's ray causes
the top of the pause
time; when the
photocells work again,
the pause time restart
from zero.
t.PCh the interruption of the
photocell's ray causes
the top of the pause
time; when the
photocells work again,
the gate stops f
or a
time to be set between
0 to 120 sec.
If the function is
t.PCh, the
display shows 5.0: set the
wished functions pressing the
UP or DOWN keys.