Parameter lock (P6.5.2)
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated, the text
*locked*
will appear on the display if you try to edit a
parameter value.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pressing
Menu button right.
Use the
Browser buttons
to change the
parameter lock status. Confirm the change with the
enter
button or go back to the previous level by
pressing
Menu button left.
Figure
7-11. Parameter locking
Start-up wizard (P6.5.3)
The Start-up wizard facilitates the commissioning of the inverter. If active, the Start-up wizard
prompts the operator for the language and application of his/her choice and then displays the first
menu or page.
Activating the Start-up wizard: In the System Menu, find page P6.5.3. Press
Menu button right
once
to enter the edit mode. Use the
Browser buttons
to select
Yes
and confirm the selection with the
enter
button.
If you want to deactivate the function, follow the same procedure and give the
parameter value
No
.
Figure
7-12. Activation of Start-up wizard
To Next Page
Loading...
