vacuubrand BVC control - Disinfection

page 37 of 76
Important notes on use of disinfectants, see also “Safety
during operation”
Aggressive disinfectants which release chlo-
rine or oxygen radicals, e.g., sodium hypochlo-
rite (chlorine bleach) or peroxide compounds
can corrode the material of the 4l polypropyl-
ene collection bottle and other components (e.
g., couplings). This may lead to stress cracks
and breakage of the 4l polypropylene bottle.
+ Therefore, prolonged use of these disinfec-
tants in the 4l polypropylene bottle is strong-
ly discouraged. After brief disinfecting oper-
ations in the bottle, rinse bottle thoroughly to
avoid leaving residues of disinfectant in the
bottle.
➨ Alternative: Use the BVC control G / BVC
professional G with 2l borosilicate glass bot-
tle.
Attention: The quick-coupling accessory
sets between the pumping unit and VHC
pro
are not suitable for use with sodium hypo-
chlorite (chlorine bleach).
BVC control G
BVC professional G
Sodium
hypochlorite
(chlorine
bleach)

BVC control
BVC professional
Sodium
hypochlorite
(chlorine
bleach)
Disinfection
NOTICE
UV disinfection is permitted but may lead to discoloration
of the plastic parts.
Attention: UV disinfection acts only at the surface.