vacuubrand BVC control - Assembling a Hose Nozzle at the Bottle Head of the BVC

page 50 of 76
Assembling a hose nozzle at the bottle head of the BVC
Empty bottle.
Decontaminate equipment if necessary.
Remove lter with connection tubing from bottle
head.
Remove screw cap from the collection bottle.
Unscrew closing screw.
Screw hose nozzle with seal ring into the screw
cap.
Only BVC with polypropylene bottle: Secure
hose nozzle with counter nut.
Screw screw cap to bottle.
Assemble lter.
If necessary, close unused connections.
Hose nozzle (638509), see “Accessories”, e.g., for ltration applications
1
Only BVC with polypropylene bottle: Re-
move counter nut (1) inside the screw cap.