Operating instructions ecoTEC plus 9376
3.3 Care
• Clean the exterior of your appliance with a damp cloth
and a little soap.
h
Note
Do not use scouring or cleaning agents, which
might damage the housing or plastic fittings.
3.4 Recycling and disposal
Both your Valliant ecoTEC plus 937 boiler and its
packaging consist mainly of recyclable raw materials.
3.4.1 Equipment
Do not dispose of your Valliant ecoTEC plus 937 boiler
or any of its accessories with household waste. Make
sure the old appliance and any accessories are disposed
of properly.
3.4.2 Packaging
Please leave the disposal of the transport packaging to
the qualified servicing company which installed the
appliance.
h
Note
Please observe the applicable national legal
regulations.
4 Operation
4.1 Overview of the operating elements
bar
iFP
1
10
9
8
7
6
2
3
4
5
Fig. 4.1 Operating elements ecoTEC
The operating elements have the following functions:
1 Display indicating the current heating flow
temperature, the filling pressure of the heating
system, the operating mode and other additional
information
2 Button "i“ for calling up information
3 Controller (accessory)
4 Pressure gauge showing the filling or operating
pressure in the heating system
5 on /off switch
6 Button "+“ to move on through the display
screens
7 Button "-“ to move backwards through the
display screens and for displaying the filling
pressure of the heating system
8 Button "Fault Reset“
9 Rotary knob for setting the heating flow
temperature
10 Rotary knob for setting the domestic hot water
temperature, for switching the warmstart
function on and off and for switching the hot
water storage function on and off
3 Instructions on operation
4 Operation
To Next Page
Loading...
Need help?
General
