Need help?Do you have a question about the Vaillant uniSTOR and is the answer not in the manual?
General| Maximum Operating Pressure | 10 bar |
|---|---|
| Capacity | 120L, 150L, 200L, 300L |
| Insulation | High-density foam insulation |
| Thermal Insulation | High-density foam insulation |
| Weight | 50 kg |
| Dimensions (Height x Diameter) | Varies by model |
Explains symbols, applicability, identification, and CE labelling for documentation.
Details the Benchmark quality mark for installation, commissioning, and servicing.
Provides guidelines on safety and warning information for system operation.
Describes cylinder purpose, limitations, and essential safety instructions.
Details safety devices, temperature regulation, and functional elements of the cylinder.
Covers setting hot water temperature, using the immersion heater, and frost protection.
Covers immersion heater use, frost protection, cleaning, and temporary service removal.
Covers switching off production, energy saving tips, and fault finding.
Details regular inspection and maintenance requirements for the cylinder.
Instructions on proper disposal of the cylinder and its packaging.
Information on Vaillant service, warranty policy, and contact details.
Provides technical specifications and data for the uniSTOR domestic hot water cylinder.
Covers symbols, applicability, identification, and CE labelling for documentation.
Details the Benchmark quality mark for installation, commissioning, and servicing.
Provides guidelines on safety and warning information for installation and maintenance.
Describes cylinder purpose, limitations, and general safety instructions.
Lists relevant EU standards, GB regulations, technical guidance, and related documents.
Details cylinder types, safety devices, and operating elements.
Illustrates functional elements, electric immersion heater, and technical data.
Provides detailed dimensions for various uniSTOR domestic hot water cylinder models.
Details the package contents and safe transportation methods for the cylinder.
Specifies requirements for a suitable and safe installation location for the cylinder.
Covers installing pipes for the reheating circuit and the motorised valve.
Details installing hot water pipes and cold mains inlet, including pressure requirements.
Covers mounting the safety assembly and the external expansion vessel.
Details mounting the drain valve and designing discharge pipes for safety.
Provides guidance on suitable locations for high drain connections.
Details electrical connections for control components, emphasizing safety.
Guides the connection of the electric immersion heater, stressing electrical safety.
Outlines options for combining control components with different boilers and wiring.
Details wiring diagrams and installing control components with connection diagrams.
Covers flushing the reheating circuit and appropriate water treatment measures.
Provides step-by-step instructions for filling the cylinder with water.
Guides on filling and venting the central heating system.
Covers commissioning the boiler, setting thermostats, and handing over to the operator.
Details essential maintenance tasks on the cylinder and their corresponding intervals.
Guides on checking relief valves, expansion relief valve, and expansion vessel charge pressure.
Provides instructions for safely draining the cylinder.
Guides users on identifying and resolving common faults with the cylinder.
Guides on temporarily and permanently taking the cylinder out of service.
Instructions on proper disposal of the cylinder and its packaging, adhering to regulations.
Provides details on Vaillant service, warranty policy, and contact information.
To Next Page
