Contents
1 Notes on the documentation ........................... 2
1.1 Storing the documents ............................................ 2
1.2 Symbols used ............................................................. 2
2 Description of the appliance ........................... 3
2.1 Construction and function ...................................... 3
2.2 Conformity with Directives ..................................... 3
2.3 Model overview .......................................................... 3
2.4 Identification plate .................................................... 3
3 Safety instructions and regulations .............. 3
3.1 Safety instructions ................................................... 3
3.2 Intended use ............................................................... 4
3.3 Regulations and guidelines ..................................... 4
4 Operation ........................................................... 4
4.1 Filling and draining the DHW cylinder ................. 4
4.2 Care .............................................................................. 5
4.3 Inspection and maintenance .................................. 5
5 Installation ......................................................... 5
5.1 Installation location .................................................. 5
5.2 Dimensions.................................................................. 5
5.2.1 Tilting dimensions for VIH S, VIH R and
VIH RW ......................................................................... 5
5.2.2 Unit and connection dimensions VIH S ............... 6
5.2.3 Unit and connection dimensions VIH R .............. 7
5.2.4 Unit and connection dimensions VIH RW ........... 8
5.3 Transport to the installation location .................. 9
5.3.1 Transport in the packaging .................................... 9
5.3.2 Transport without packaging ................................. 9
5.3.3 Transport without cladding .................................... 10
5.3.4 Transport without insulation ................................. 11
5.3.5 Fitting the insulation and the casing ................... 11
5.4 Connecting the cylinder .......................................... 12
6 Start-up .............................................................. 13
6.1 Regulations ................................................................. 13
7 Maintenance ...................................................... 13
7.1 Cleaning the internal tank ...................................... 13
7.2 Servicing the magnesium sacrificial anode ........ 13
7.3 Replacement parts .................................................... 14
8 Recycling and disposal ..................................... 14
8.1 Unit ............................................................................... 14
8.2 Packaging .................................................................... 14
9 Vaillant Customer Service and warranty ...... 14
9.1 Vaillant customer service ....................................... 14
9.2 Manufacturer's warranty ........................................ 14
10 Technical data ................................................... 15
10.1 Technical data for VIH S 300/400/500 and
VIH R 300/400/500 ................................................ 15
10.2 Technical data for VIH RW 300 ............................. 16
Operating and Installation Manual for uniSTOR, auroSTOR, geoSTOR Cylinders 020080043_002
Contents
1 Notes on the documentation
1 Notes on the documentation
The following instructions are intended to guide you
throughout the entire documentation. Further docu-
ments apply in combination with this installation instruc-
tions.
We accept no liability for any damage caused by non-
observance of these instructions.
Other applicable documents
When installing the cylinder, please observe all installa-
tion instructions for components of the system. These
manuals are included with the individual parts of the in-
stallation and ancillary components.
1.1 Storing the documents
Pass these installation instructions and all other applica-
ble documents and, if necessary, any required aids to
the system operator. Whose responsibility it is to ensure
the manuals and auxiliary material are available when-
ever required.
1.2 Symbols used
Take note of the safety information in this manual when
installing the equipment.
The symbols used in the manual are explained below:
d
Danger!
Immediate risk of serious injury or death!
H
Danger!
Danger of burning or scalding!
a
Caution!
Potentially dangerous situation for the product
and environment!
h
Note!
Useful information and instructions.
• Symbol for a necessary task