Vaillant uniSTOR Operating And Installation Manual

9Operating and Installation Manual for uniSTOR, auroSTOR, geoSTOR Cylinders 0020080043_00
5.3 Transport to the installation location
The cylinder is delivered fully assembled.
You have various options for transport to the installa-
tion site.
– Complete in the packaging, if possible at the customer
side
– Without packaging, completely assembled, if the
transport route permits it
– Without casing or insulation, for narrow doorways or
to protect the casing
h
Note!
To remove and refit the casing and insulation
takes 1 person approx. 10 minutes.
Note!
The installation can optionally be carried out
with or without the insulation / casing.
Note!
If necessary, use the transport aids from the
accessories.
a
Caution!
Damage to the cylinder.
If the cylinder is brought to the installation lo-
cation on a trolley or carried there, pay atten-
tion to the insulation on the base of the cylin-
der. It must not be damaged.
5.3.1 Transport in the packaging
Fig. 5.5 Transport in the packaging, consisting of top and bot-
tom styrofoam pads and a cardboard sleeve carton
5.3.2 Transport without packaging
Fig. 5.6 Transport without packaging
Installation 5

Vaillant uniSTOR Specifications

General

Maximum Operating Pressure	10 bar
Capacity	120L, 150L, 200L, 300L
Insulation	High-density foam insulation
Thermal Insulation	High-density foam insulation
Weight	50 kg
Dimensions (Height x Diameter)	Varies by model