7. Using Probe with Indigo Transmitters
7.1 Indigo Overview
1 3.5” TFT LCD color display: non-display option with LED available for certain models.
2 Cable locking wheel: insert cable, hold in place, and turn the wheel counterclockwise.
3 Wireless configuration interface (WLAN) activation button.
4 Rubber lead-through with strain relief. Cable feedthrough option also at back of
transmitter.
5 Input/output cable.
The probe can be connected to Vaisala Indigo transmitters by using a cable.
Chapter 7 – Using Probe with Indigo Transmitters
29
To Next Page
Loading...
