USER'S GUIDE_______________________________________________________________________
98 ___________________________________________________________________ M210194EN-A
Maintenance commands
Function Command
listing linear and multipoint corrections CORR
linear corrections on/off LC ON/OFF
entering linear corrections LCI
multipoint corrections on/off MPC ON/OFF
entering multipoint corrections MPCI
calibration date CALD
entering linear corrections of analog output DLCI*
* only with the optional analog output
Diagnostic commands
Function Command
basic information on settings ?
software version VERS
serial number SNUM CPU
outputting error messages ERRS
testing transducer operation TEST n
listing transducer coefficients C n
testing pulse output mode PTEST
testing output ITEST*
* only with the optional analog output
To Next Page
Loading...
