30
EN
Useful information
C
1. Hold the pre-filter and turn it anti-clockwise to unlock it.
Pull the filter up and out of the dishwasher.
2. Pull the fine filter down to remove it
from the filter unit. The pre-filter can be
separated from the main filter by gently
pressing the tabs at the top of the filter
and pulling the filter out.
3. Large food residue can be removed by rinsing the filter
under running water. For more thorough cleaning, use a
soft cleaning brush.
4. Reassemble the filters by reversing the disassembly order,
replace the filter system and turn it clockwise to the arrow
indicating the closed position.
CAUTION
Do not overtighten the filters. Replace the filters correctly
and in order, otherwise large food particles could enter
the system causing a blockage. Never use the dishwasher
without installing the filters. If the filters are not correctly
replaced, the performance of the appliance may be
impaired potentially damaging the dishes and utensils.
Open
Pre-filter
Fine filter
Main filter
To Next Page
Loading...
Need help?
General
