33
EN
Useful information
C
Error codes
In the event of a malfunction, the dishwasher will display error codes to help you identify
the problem:
Codes Meaning Possible causes
E1
The taps are not open, the water supply
is blocked or the water pressure is too
low.
E4 Overflow A dishwasher component is leaking.
E8
Incorrect orientation of the
dispensing valve
Open circuit or defective dispensing
valve.
CAUTION
- In the event of an overflow, turn off the main water
supply before calling a technician.
- If there is water at the bottom of the tub due to an
overflow or small leak, this water must be removed
before restarting the dishwasher.
To Next Page
Loading...
Need help?
General
