13
• Attendant unlocks door by pressing "*" key
twice while connected to door speaker (door
speaker must be connected to one of the last four
zones of the main board making the door unlock
feature available)
• Attendant must hang up to terminate call
Remote Station Access - Call Button
Button Presses Functions
1 press Originate call to attendant
2 presses Meet-Me / Follow-Me if appropriate (see definitions)
3 presses Ignored
4 or more presses Originate emergency call to attendant
Attendant Station Dialing Plan
2 Digit Zone Access to Individual Stations:
Dial Codes Functions
10..33 Handsfree speakers - Main board
"**" during HF to
zone 30,31,32, or 33
Operate relay for longer of 2.5 seconds or duration
of second press; operation may be repeated as long
as connected.
(Station 1 = code 10, station 2 = code 11, ……station 24 = code 33)
3 Digit Zone Access to Individual Stations:
Dial Codes Functions
101..124 Handsfree speakers - Main board
"**" during HF to zone
121, 122, 123, or 124
Operate relay for longer of 2.5 seconds or duration
of second press; operation may be repeated as long
as connected.
(Station 1 = code 101, station 2 = 102, ….. station 24 = code 124)
Page Codes
Dial Codes Groups
1 2 3 4
#10
external all call
(multiple V-2924As)
#11
system all call
#12
#14
#60
(Example: #60 + 71 + 73 + *)
#61
#62
#70
#71
#72
#73
#92
Set Time hh:mm:ss
#93
Cancel Emergency Tone
"*" during 1-way page
Mute page while waiting for "Meet Me"
"##" during any
connected call
Disconnect current call connect to next
queued call or receive dial tone if none
queued.
#60 - Serial Group Call - User may select any combination of page codes during dialing. Group 10 (External All Call) is not a valid
code selection when using these dial codes.
The attendant may dial a new zone or group during a conversation. The current conversation will be disconnected and the new
request connected without the attendant needing to return to dial tone.
To Next Page
Loading...
Need help?
General
