4.2.3 Operation with DataLog x2
If you prefer you can continue to set the uvSVX up using DataLog X2:
Load the latest version of Valeport's configuration software DataLog x2. It can be downloaded from
https://Valeport.download. Search for uvSVX then look for the software section towards the bottom
of the page.
Setup the TCP Client windows to match the data from the Lantronix DeviceInstaller, click on the
symbol in the Port Settings section of the menu to get an options dialogue. The instrument can
be configured using the software or with individual #commands as required.
To Next Page
Loading...
