Valet 710T User Manual

Model 710T
Installation Guide
© 1999 Directed Electronics, Inc. Vista, CA N710T 10-99
®
®

Valet 710T Specifications

General

Brand	Valet
Model	710T
Category	Car Alarm
Language	English

Summary

what is included

installation points to remember

wiring the control unit

primary harness (H1) wire connection guide

H1/1 ORANGE (-) ground-when-armed output

Details the function and connection of the H1/1 Orange wire for armed output.

H1/2 WHITE (-) parking light output

Explains the H1/2 White wire's use for parking light flashing.

H1/3 WHITE/BLUE (-) channel 3 output

Describes the H1/3 White/Blue wire for Channel 3 output signals.

H1/4 BLACK/WHITE (-) 200 mA domelight supervision output

H1/6 BLUE (-) 200 mA second unlock output

Type A (+) polarity system door lock wiring

Type B (-) polarity system door lock wiring

Type C (+) reversing polarity door lock wiring

H1/8 BLACK (-) chassis ground connection

H1/9 YELLOW (+) ignition input

H1/10 BROWN (-) horn honk output

H1/11 RED (+)12V constant power input

H1/12 RED/WHITE channel 2, 200mA (-) output

plug-in LED and valet/program switch

harness 2 (H2), (+/-) door lock outputs

door lock wiring diagrams

type A: (+) 12V pulses from the switch to the factory relays

Details Type A door lock wiring using positive 12V pulses to factory relays.

type B: (-) pulses from the switch to the factory relays

type C: reversing polarity

type D: after-market actuators

type E: mercedes-benz and audi (1985 & newer)

type F: one-wire system

transmitter/receiver learn routine™

transmitter configurations

standard configuration

Assigns transmitter buttons to functions in Standard Configuration mode.

oem style configuration

two vehicle operation with single transmitter

operating settings learn routine™

features menu

feature descriptions

rapid resume logic

master dealer remotes

troubleshooting