Valet 712T User Manual

© 2005 Directed Electronics, Inc. Vista, CA
N712T 01-05
MMooddeell 771122TT
IInnssttaallllaattiioonn GGuuiiddee
NOTE: This product is intended for installation by a professional installer only!
Any attempt to install this product by any person other than a trained professional
may result in severe damage to a vehicle’s electrical system and components.
VVaalleett
®®

Valet 712T Specifications

General

Brand	Valet
Model	712T
Category	Car Alarm
Language	English

Summary

Primary Harness (H1) 12-Pin Connector Wiring

H1/1 RED: 12V Constant Power Input

Details the connection of the RED wire to the vehicle's constant 12V power supply.

H1/2 BLUE: Second Unlock Output

Describes the BLUE wire's function for progressive unlock on a second button press.

H1/5 GREEN/BLACK: Lock #30 Common Output

Details the GREEN/BLACK wire for the door lock relay common output.

H1/11 BLACK: Chassis Ground Connection

Provides instructions for connecting the BLACK wire to a proper chassis ground.

H1/15 YELLOW: Switched Ignition Input

Explains the YELLOW wire's connection to the vehicle's switched ignition.

System Features Learn Routine

Entering the Learn Routine

Step-by-step instructions on how to access the system's feature programming mode.

Programming Feature Settings

System Features Menus

Feature Number and Settings

Feature Descriptions

Transmitter/Receiver Learn Routine

Adding Transmitters to System

Channel Assignment Table

Wiring Quick Reference Guide