To Next PageTo Next Page
Need help?Do you have a question about the Valet 562T and is the answer not in the manual?
Guidelines for selecting an optimal and secure location for the control module.
Best practices for antenna placement to ensure optimal range and performance.
Recommendations for discreetly and accessibly mounting the valet/program switch.
Guidance on positioning the status LED for optimal visibility and accessibility.
Advice on hiding the starter kill relay connections to prevent easy bypass.
Identifies suitable sources for a constant 12V power supply for the system.
Details on locating the vehicle's 12V switched ignition wire using a multimeter.
Instructions for locating the vehicle's starter wire for system connection.
Guide to identifying the positive brake light wire for system integration.
How to locate the accessory and heater wires for vehicle comfort systems.
Method for finding the RPM input wire for engine speed sensing.
Locating the wait to start bulb wire for proper operation in diesel vehicles.
Diagram illustrating the connections for the primary 12 pin harness H1.
Diagram for the remote start ribbon harness connections.
Diagram for the heavy gauge relay satellite wiring.
Diagram for the auxiliary harness H2 connections.
Diagram for the remote start harness H3 connections.
Diagram for the door lock harness H4 connections.
Diagram for the remote start auxiliary harness connections.
Connecting the H3 1 BLACK WHITE wire for neutral safety switch input.
Connecting the H3 2 VIOLET WHITE wire for tachometer input.
Connecting the H3 3 BROWN wire for brake switch input.
Connecting the H3 4 GRAY wire for hood pinswitch input.
Connecting the H3 5 BLUE WHITE wire for status defogger output.
General