39
1. Press the button to start pre-set
program 01.
2. The machine prodiucing ice cream in
MODE 1(ice cream temperature and
density check).
During production you can change value of
MODE 1 (see chapter “PROGRAM
MODIFICATIONS AND SETTINGS”).
Production ends when set values are
reached. The end of the cycle is notified by
a beep and a light signal (if any). A
message is displayed to take out the ice
cream. The machine will keep ice cream
consistency automatically until extraction,
i.e. until the end of the maximum time limit.
7.2.8 Key STOP / RESET
The STOP button stops all active function, operation, program of the
machine indifferently in which phase the machine is.
The HOME screen is displayed.
7.2.9 Quick keys
The quick button permitted easier and quicker access to pre selected
program.
The quick button permitted easier and quicker access to pre selected
program.
The quick button permitted easier and quicker access to pre selected
program.
The quick button permitted easier and quicker access to pre selected
program.
To Next Page
Loading...
Need help?
General