EasyManuals Logo

Valor Firelite OXYSAFE 2 User Manual

Valor Firelite OXYSAFE 2
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
OWNER’S GUIDE
Page 5
DO
Wait three minutes before attempting to relight if the fire is switched off or the flames
are extinguished for any reason. (Your fire is fitted with a safety device that will
automatically shut off the gas supply to the fire if, for any reason, the flames go out.)
Get advice about the suitability of any wall covering near your fire. Soft wall
coverings (e.g. embossed vinyl, etc.) which have a raised pattern are easily affected by
heat. They may, therefore, scorch or become discoloured when close to a heating
appliance. Please bear this in mind whenever you are considering redecorating.
Provide a minimum clearance of 50mm between the outer case sides and any corner
wall having combustible material or other combustible surface which projects beyond the
front of the fire (See figure 1). Please bear this in mind if ever you are considering
altering the room.
DON’T
Hang clothing, towels or any other fabrics over the fire.
Fill in the space behind the case.
Use the fire without the dress guard being in position.
Attempt to clean or service the fire until it has been switched off and allowed to cool
completely.
Use the fire with damaged radiants.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valor Firelite OXYSAFE 2 and is the answer not in the manual?

Valor Firelite OXYSAFE 2 Specifications

General IconGeneral
BrandValor
ModelFirelite OXYSAFE 2
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals