EasyManuals Logo

Valor LX Series User Manual

Valor LX Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Cleaning your fireplace
Pilot light Safe zone
Re t the windows
1. Remove any fuel bed media from the window bot-
tom rail before installing the window.
2. Ensure the braided gasket is well tted to the bot-
tom of the window.
3. Insert the window behind the front panel of the
appliance. Ensure the angled rail is facing out.
4. Lower the bottom of the window into the bottom
rail.
5. Push the top of the window pane against the
rebox. Ensure it is centered on the rebox so it
seals properly against the end window.
Out
Bottom railing
Log position
Log position is important in your Valor replace
because it can optimize the beauty of the ame and
the combustion e ciency of your replace.
If logs are moved during glass cleaning or other
replace maintenance, refer to your replace
Installation Manual for speci c instructions on how
to position them for optimal operation. If you are
not comfortable performing this maintenance,
please contact your dealer.
Clear pilot safe zone
There is a protected zone in front of the pilot light,
bordered by a shallow steel barrier, to allow the pilot
light to ignite the main burner. Ensure that it remains
clear of embers to allow for proper lighting.

Other manuals for Valor LX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valor LX Series and is the answer not in the manual?

Valor LX Series Specifications

General IconGeneral
CategoryIndoor Fireplace
Fuel TypeNatural Gas or Propane
VentingDirect Vent
Glass SizeVaries by model
Ignition SystemElectronic Ignition
DimensionsVaries by model
WeightVaries by model
WarrantyLimited Lifetime Warranty
BTU InputUp to 40, 000 BTU
EfficiencyUp to 85%

Related product manuals