EasyManuals Logo
Home>Valor>Indoor Fireplace>LX Series

Valor LX Series User Manual

Valor LX Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Barriers and safety
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this appli-
ance and must be installed for the protection of
children and other at-risk individuals.
If the barrier becomes damaged, the barrier must
be replaced with the manufacturer’s barrier for
this appliance.
Any safety screen, guard or barrier removed for
servicing the appliance must be replaced prior to
operating the appliance.
Initial and annual inspection
The appliance and venting system should be in-
spected before initial use and at least annually
by a professional service person.
Installation and repair should be performed by
a quali ed service person. The appliance should
be inspected before use and at least annually by a
professional service person. More frequent clean-
ing might be required due to excessive lint from
carpeting, bedding material, etc. It is imperatuve
that control compartments, burners, and circulta-
ing air passageways of the appliance be kept clean.
Do not use this appliance if any part has been
under water. Immediately call a quali ed service
technician to inspect the appliance and to replace
any part of the control system and any gas control
that has been under water.
Intended use
This appliance is designed and approved as a
supplemental heater to be used while attended.
The use of an alternate primary heat source is
advisable.
This unit is not for use with solid fuel.
Maintenance
Keep the unit’s control compartment, burner, and
circulating air passageways clean to enable ad-
equate combustion and ventilation air.
Inspect the external vent cap on a regular basis to
ensure that no debris, plants, trees, or shrubs are
interfering with air ow.
Venting
This unit must be used with a vent system as
described in the installation manual. No other vent
system or components may be used.
Never obstruct the ow of combustion and venti-
lation air. Keep the front of the appliance clear of
all obstructions for optimal operation and ease of
servicing.
This unit must be vented directly outside and must
never be attached to a chimney serving a separate
solid fuel burning appliance. Each gas appliance
must use a separate vent system. Common vent
systems are prohibited.
Safety and your fireplace
Front outlet
Top of replace
Ceiling outlet
WARNING
HeatShift
System:
Do not cover
or place items
in front of or
above outlet(s)
or on top of
replace!

Other manuals for Valor LX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valor LX Series and is the answer not in the manual?

Valor LX Series Specifications

General IconGeneral
BrandValor
ModelLX Series
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals