Valtra T174 User Manual

8. Fill up the housing with oil to the level of the hole.
The breather can be loosened for bleeding. Check that the breather is not
blocked. When filling, the tractor has to stand on even ground.
9. Use the front PTO a moment and check oil.
10. Fit the protector.
Fasten the two fastening screws.
4.7.4.20 Checking front PTO couplings
Check the front power take-off (PTO) couplings periodically.
• Check that all fixing screws are tight.
• Check that the hydraulic connections have no leaks.
• Grease the grease nipple on the universal joint.
• Remove the air blocker from the front linkage frame.
1
GUID-CDC92894-B278-4A1D-8FED-B6F5A441B428
1. Air blocker
• Grease the grease nipple on the universal joint.
1
GUID-582E1BE5-3747-4390-8EA4-74439B2F1077
1. Grease nipple
4. Maintenance
- 308 -

Valtra T174 Specifications

General

Cylinders	6
Max Speed	50 km/h
PTO Speed	540/1000 rpm
Rated Power	174 hp
Engine	AGCO Power
Transmission	PowerShift
Transmission Speeds	30F/30R
Weight	7300 kg
Wheelbase	2, 995 mm
Hydraulic System	Load Sensing
Hydraulic Flow	115 L/min
Cab	Yes