What to do if PARKING BRAKE FAULT appears on my Valtra T194?
If you see 'PARKING BRAKE FAULT!' it indicates a potential issue with the parking brake, which might not function correctly. This could also affect the emergency brake. It is advised to contact an authorised Valtra workshop.
What to do if SECONDARY BRAKE FAULT appears on my Valtra T194?
The 'SECONDARY BRAKE FAULT!' message indicates a fault in the emergency brake, meaning it is not functioning. It is advised to contact an authorised Valtra workshop.
What does it mean if the pressure oil filter clogging indicator light is lit on my Valtra T194?
If the pressure oil filter clogging indicator light is lit, it means the transmission or hydraulic system filter is blocked. If the return oil filter is the cause, change it.
What should I do if the book symbol is flashing on the A-pillar display of my Valtra Tractor?
If the book symbol is flashing on the A-pillar display, it indicates an active service code in the system. It is advised to contact an authorised Valtra workshop immediately.
What to do if Fuel Level Sensor Has Open Circuited on Valtra T194?
If the 'Fuel Level Sensor Has Open Circuited' message appears, it means the fuel level sensor has an open circuit. It is advised to contact an authorised Valtra workshop.
What to do if Fuel Level Sensor Has Short Circuited on Valtra T194 Tractor?
If the 'Fuel Level Sensor Has Short Circuited' message appears, it indicates the fuel level sensor has a short circuit. It is advised to contact an authorised Valtra workshop.
General| Max Speed | 50 km/h |
|---|---|
| Wheelbase | 2995 mm |
| Cylinders | 4 |
| Engine Type | AGCO Power |
| Hydraulic System | Load-sensing |
Details on replacing safety signs, maintaining hardware safety, and safe operation procedures.
Explains how to change driving direction and apply the parking brake using the power shuttle lever.
Details on using brake pedals individually or together, and emergency brake functions.
Explains the gearbox, speed ranges, Powershift stages, and gear selection.
Instructions for filling the fuel tank and the AdBlue/DEF tank, including safety precautions.
Safety precautions and instructions for attaching implements to the PTO.
Details the rear valves, return coupling, valve mode selector, and flow control adjustments.
Details components like top link, lift links, lower links, side limiters, and their adjustments.
Required inspection for new tractors after 50 running hours to retain guarantee.
General instructions for maintenance, including test drives, engine stops, and cleaning.
Details on fuel quality requirements, storing fuel and AdBlue/DEF, and biodiesel fuel.
Overview of when to perform tractor service based on hours or time intervals.
Chart outlining maintenance tasks required daily, weekly, or at 600, 1200, and 2400 hour intervals.
Periodically checking the emergency brake function and adjusting the parking brake if needed.
Procedure for changing engine oil and oil filter, using original AGCO Parts filters.
Changing brake circuit oil by bleeding after transmission oil change or repairs.
Guidance on interpreting indicator lights and service codes for error situations.
Procedures for towing the tractor when the engine is running or not running.
To Next Page
