Valtra T194 User Manual

4.7.3.5 Checking and greasing the front linkage
Check and grease the front linkage periodically.
• Check regularly that all screws and nuts are tight.
1
GUID-57C69758-FE2F-4687-BB13-8A750A9C2B54
1. Screws and nuts
• Tighten all screws and nuts of the front linkage after the first 15-25 running
hours.
• Check that the hydraulic connections have no leaks.
4. Maintenance
- 279 -

Valtra T194 Specifications

General

Max Speed	50 km/h
Wheelbase	2995 mm
Cylinders	4
Engine Type	AGCO Power
Hydraulic System	Load-sensing