• Fasten the seat belt to the anchor points on the seat.
• Adjust the backrest inclination.
• Pull the backrest inclination lever up.
• Set the backrest to the desired position.
• Adjust the armrest.
• Remove the cover.
• Change the armrest position in the mounting slot.
• Adjust the lumbar support.
Turn the knob clockwise or anti-clockwise to adjust the lumbar support. The
height and depth are adjusted at the same time.
• Turn the seat heating on or off.
• Adjust the headrest height by lifting or lowering it.
• Remove the headrest by pulling it upwards.
3.2.3 Adjusting the steering wheel
You can adjust the steering wheel position with a lever and a locking pedal.
CAUTION: Do not adjust the steering wheel position while driving.
There is an increased risk of loss of control.
GUID-9C185E91-3B11-40DB-A18B-5F4F6CE81499
1. Lever for adjusting steering wheel position
2. Locking pedal for steering wheel rake adjustment
• Adjust the steering wheel position.
• Pull the lever upwards.
• Move the steering wheel up or down to the desired position.
• Push the lever down to lock the steering wheel position.
3. Operation
- 67 -
To Next Page
Loading...
Need help?
General
