2. Press the engine RPM memory button shortly.
The setting is activated and stored in the memory. The indicator light is
continuously lit.
3.8.15.3 Activating and deactivating the engine speed cruise control
NOTE: Control the position of the hand throttle before deactivating the cruise
control.
GUID-E725D285-E4B3-4EAF-A11B-AD117F7BD9A7
1. Hand throttle
2. Engine RPM memory button
• Activate the engine speed cruise control.
• Activate an engine speed value that is already saved in the memory by
pressing the engine RPM memory button shortly (less than two seconds).
• Save a new engine RPM value into the memory and activate it by setting
the desired engine RPM with the hand throttle or drive pedal and
pressing the engine RPM memory button for a longer time (two seconds).
• Deactivate the engine speed cruise control.
• Press the engine RPM memory button shortly (less than two seconds).
• If the driving speed is more than 20 km/h, press the brake pedal or clutch
pedal.
When the engine speed cruise control is activated and the Auto1 driving mode is
selected, pressing the drive pedal or using the hand throttle increases the driving
speed only and not the engine speed.
3. Operation
- 129 -
To Next Page
Loading...
Need help?
General
