Mechanical jaw, main pin diameter 31.5 mm (ISO 6489-2, A)
Drawbar eye standard for jaws DIN 74054 or DIN 11026, ISO 5692-2, ISO 8755
Mechanical non-swivel jaw, main pin diameter 28 mm (ISO 6489-5, X) / 50 mm (ISO 6489-5, Z)
Drawbar eye standard for non-swivel jaw ISO 5692-3, X (Ø28 mm) / ISO 5692-3, Z (Ø50 mm)
Drawbar, main pin diameter 31.5 mm
Drawbar eye standard for drawbar ISO 5692-1, ISO 5692-2, ISO 8755, ISO 1102
6. Technical specifications
- 403 -
To Next Page
Loading...
Need help?
General
