VAMP 140 - Analog Output Ma OUTPUT; Disturbance Recorder Menu RECORDER

VAMP Ltd Overcurrent and earth-fault relay
Operation and Configuration
VAMP 140
VM140.EN011 Vamp 24h support phone +358 (0)40 573 6316
25
5.9. Analog output mA OUTPUT
Via the submenus of the mA OUTPUT menu the following
functions can be read and set:
• Analog output reading / editing a forced value (AO)
• Enabling / disabling of forced control of the analog output
(FORCE)
• Choosing the coupling of analog output (Link)
• Setting the coupling minimum value (Min)
• Setting the coupling maximum value (Max)
• Setting the analog output minimum value (AOmin)
• Setting the analog output maximum value (AOmax)
Available links:
• IL1, IL2, IL3, IL
• Io
• f
• I2/I1
• I_fault
5.10. Disturbance recorder menu
RECORDER
Via the disturbance recorder menu the following functions can
be read and set:
• Recording mode (Mode)
• Sample rate (Rate)
• Recording time (Time)
• Pre trig time (PreTrig)
• Scroll list of active links (Links)
• Add a link to the recorder (AddLink)
• Clear all links (ClrLink)
• Manual trigger (MnlTrig)
• Count of ready records (ReadyRec)
For list on available links see chapter 2.6 in the technical
description.