VAMP 140 - Service Menu SERVICE

VAMP 140 Overcurrent and earth-fault relay
Operation and Configuration
VAMP Ltd
26
Vamp 24h support phone +358 (0)40 573 6316 VM140.EN011
5.11. Service menu SERVICE
Via the submenus of the Service menu the following functions
can be read and set:
Relays
• Enabling / disabling of forced control of the output
relays (FORCE)
• The status of the output relays (T1 and T2, A1 – A3
and IF)
• The forced control of the output relays (T1 and T2, A1 –
A3 and IF)
Setup
• Setup of screen brightness (Bright)
• Setup of screen scroll delay (ScrlDelay)
• Changing of password (ChgPwd)
• Changing of date, time and date style (Date, Time,
Style)
DeviceInfo
• Serial number of the device (SerN)
• Software version (Prgver)