VAMP 140 - 7 Order Information

VAMP 140 Overcurrent and earth-fault relay
Technical description
VAMP Ltd
52
Vamp 24h support phone +358 (0)40 573 6316 VM140.EN011
7. Order information
When asking for quotations or when ordering, please, state:
The ordering code:
Quantity:
Auxiliary voltage:
Options:
VAMP 140 ORDERING CODE
VAMP 140
-3 A 7
Nominal current [A]
3
= 1A / 5A
Nominal Earth Current [A]
A
= 1A / 5A / SEF 1A
Frequency [Hz]
7
= 50/60Hz
Supply Voltage [V]
A
= 40.. 265Vac/dc
B
= 18.. 36Vdc
Optional Hardware
A
= None
B
= Plastic Optic Interface & Arc
C
= Arc Protection
D
= Plastic Optic Interface
E
= Combined PC & protocol port
F
= Combined PC & protocol port &
A
Optional Software
A
= None
Accessories :
Order Code Explanation Note
VEA 3 CG
Ethernet Interface Module VAMP Ltd
VPA 3 CG Profibus Interface Module VAMP Ltd
VSE001 Fiber optic Interface Module VAMP Ltd
VSE002
RS485 Interface Module VAMP Ltd
VX003-3 Programming Cable (VAMPSet, VEA 3 CG+200serie) Cable length 3m
VX004-M3
TTL/RS232 Converter Cable (for PLC, VEA3CG+200serie ) Cable length 3m
VX007-F3 TTL/RS232 Converter Cable (for VPA 3 CG or VMA 3 CG) Cable length 3m
VX015-3 TTL/RS232 Converter Cable (for 100serie+VEA3CG) Cable length 3m
VX008-4
TTL/RS232 Converter Cable ( for Modem MD42, ILPH, ..) Cable length 4m
VA 1 DA-6 Arc Sensor Cable length 6m