SAFETY Section 1 - Pg 07
1.8 Electrical Shock
A. Keep the vehicle or equipment carrier, compressor hoses, tools and all personnel at
least 10 feet (3 meters) from power lines and buried cables.
B. Keep all parts of the body and any hand-held tools or other conductive objects away
from exposed live parts of electrical system. Maintain dry footing, stand on
insulating surfaces and DO NOT contact any other portion of the compressor when
making adjustments or repairs to exposed live parts of the electrical system.
C. Attempt repairs only in clean, dry and well-lighted and ventilated areas.
D. Stay clear of the compressor during electrical storms! It can attract lightning.
1.9 Safety Decals
Safety decals are placed onto, or located near, system components that can present a
hazard to operators or service personnel. All pertinent decals listed in Section 8.8, Decal
Locations are located near a component, which is subject to respect in terms of safety
precautions.
A. Always heed the information noted on the safety decals.
WARNING - DO NOT REMOVE OR COVER ANY SAFETY DECAL.
Replace any safety decal that becomes damaged or illegible.
To Next Page
Loading...
