Vanair ADHD Powertech - Specifications and Guidelines; Compressor and Lubrication Specifications

SPECIFICATIONS Section 3 - Pg 01
SECTION 3:
SPECIFICATIONS
3.1 Compressor Specifications
Type:
Rotary Screw
Delivery @ Operating Pressure:
85 Free CFM @ 100 psig
85 Free CFM @ 150 psig
125 Free CFM @ 100 psig
125 Free CFM @ 150 psig
160 Free CFM @ 100 psig
160 Free CFM @ 150 psig
185 Free CFM @ 100 psig
Cooling:
Pressurized Compressor Fluid
Lubricating Compressor Fluid:
(Factory Fill) Vanair
®
Vanguard™ High
Performance Rotary Screw Compressor Oil
Sump Capacity:
Three (3) U.S. Gallons (sump)
3-1/2 U.S. Gallons (total system)
3.2 Lubrication Guide - Compressor
IMPORTANT - The compressor oil must be of a recommended type, that is inspected
and replace together with the oil and air filters, in accordance with this manual.
CAUTION – DO NOT MIX OILS OF DIFFERENT TYPES— Substituting non-
Vanguard Oil or non-genuine Vanair filter components WILL VOID THE
COMPRESSOR WARRANTY!
The result of poorly maintained lubricant and/or filters may produce hazardous conditions
resulting in ignition, which could cause a fire in the sump. Damage to equipment and serious
bodily harm may result.
PRIME LUBRICANT CHARACTERISTICS
Viscosity:
178 SUS at 100ºF (38ºC)
Flashpoint:
457º F (236ºC)
Pour Point
-49ºF (-45ºC)
Contain:
Rust and Oxidation Inhibitors
Contain:
Detergents