6 LED Indicators
l Green AC OK: Indicates that the AC power is within specification.
l Amber ON BATTERY: Indicates that the battery is supplying the output voltage.
l Red FUSE FAULT: Indicates electronic output shutdown fuse is active and that no power is being
supplied to the load.
The maximum current that the PSU can guarantee is 1.5A plus 0.5A for battery charging. Beyond this the
fuse will trip and the LED will stay on until the load is fully disconnected.
Once the load has been disconnected, remove devices to reduce the current demand below 1.5A.
It is important to calculate the power budget adequately. See Power budget on page 5 for more information.
© Vanderbilt 2020 18 A-100661
29.06.2020
To Next Page
Loading...
