Vanderbilt ACTpro-120 - Wiring; Wiring the Actpro-120

To Next Page

To Previous Page

3 Wiring

This section describes the following.

3.1 Wiring the ACTpro-120 9

3.2 DIP switch addressing 10

3.3 Wiring Clock&Data entry and exit readers 11

3.4 Wiring Wiegand entry and exit readers 12

3.5 Wiring Door Contact 13

3.6 Wiring Push Button (PB) 13

3.7 Break Glass monitoring only 14

3.1 Wiring the ACTpro-120

Label Description Label Description

A Door contact, normally closed E Break glass monitoring, normally closed

B Push to exit, normally open F Vanderbilt reader wire colour coding

C From previous door/controller G DIP switches for door station addressing

D To next door

29.06.2020

Other manuals for Vanderbilt ACTpro-120