CT-3500 S2 USER’S MANUAL REV 1.1
8
3.2 Setting the Date and Time
To set the date and time:
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the [4] key (SET DATE & TIME)
c. The following screen will be displayed:
Type in the date using the keypad. The following screen will be displayed:
Enter the time using the alpha-numeric keypad. When the time has been entered, you
will be immediately returned to the “START-UP” menu.
ENTER TIME
HH:MM:SS
ENTER DATE
MM-DD-YY
1. SHOT DESCRIPTION
2. SAVE / RESTORE
3. SET 50/60 HZ
4. SET DATE & TIME
1. TIME BRKR 05/14/12
2. GET RSLT 08:45:25
3. SETUP
4. DIAGNOSTICS
To Next Page
Loading...