Vanguard Instruments CT-3500 S2 - Restoring a Test Shot from a USB Flash Drive

To Next Page

To Previous Page

REV 1.1 CT-3500 S2 USER’S MANUAL

3.6.4. Restoring a Test Shot From a USB Flash Drive

Use the steps below to restore a test record from a USB Flash drive to the CT-3500 S2’s working

memory:

a. Make sure the USB Flash drive containing the test record(s) is inserted in the CT-3500

S2’s USB Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:

Press the [3] key (SETUP).

b. The following screen will be displayed:

Press the [2] key (SAVE / RESTORE)

c. The following screen will be displayed:

Press the [2] key (RESTORE SHOT).

1. SAVE SHOT

2. RESTORE SHOT

3. SHOT DIRECTORY

4. ERASE SHOT

5. COPY TO THUMB DRIVE

1. SHOT DESCRIPTION

2. SAVE / RESTORE

3. SET 50/60 HZ

4. SET DATE & TIME

1. TIME BRKR 05/16/12

2. GET RSLT 09:55:55

3. SETUP

4. DIAGNOSTICS