Vanguard Instruments CT-3500 S2 User Manual

CT-3500 S2 USER’S MANUAL REV 1.1
44
3.6.7. Erasing Test Records from the Flash EEPROM
Follow the steps below to erase test records from the Flash EEPROM
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (SAVE / RESTORE).
c. The following screen will be displayed:
Press the [4] key (ERASE SHOT).
d. The following screen will be displayed:
1. ERASE SINGLE SHOT
Press the [1] key (ERASE SINGLE SHOT) to erase a single test record from the unit’s
internal Flash EEPROM. The following screen will be displayed:
ERASE SHOTS
1.ERASE SINGLE SHOT
2.ERASE ALL SHOTS
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. SHOT DESCRIPTION
2. SAVE / RESTORE
3. SET 50/60 HZ
4. SET DATE & TIME
1. TIME BRKR 05/16/12
2. GET RSLT 09:55:55
3. SETUP
4. DIAGNOSTICS

Vanguard Instruments CT-3500 S2 Specifications

General

Brand	Vanguard Instruments
Model	CT-3500 S2
Category	Timer
Language	English