CT-3500 S2 USER’S MANUAL REV 1.1
46
2. ERASE ALL SHOTS
Press the [2] key (ERASE ALL SHOTS) to erase all the test records from the unit’s
internal Flash EEPROM. The following warning screen will be displayed:
You can press the [STOP] key to cancel the process and return to the “START-UP”
menu.
Press the [ENTER] key to proceed with deleting all the test records from the unit’s
Flash EEPROM. The following screen will be displayed during the erasure process:
The following screen will be displayed when all test records have been completely
erased:
Press any key to return to the “START-UP” menu.
ALL SHOTS ERASED
ERASing ALL SHOTS
ERASE ALL SHOTS!
ARE YOU SURE?
"ENTER" To CONTINUE.
To Next Page
Loading...