VANNER
Incorporated
Owner’s Manual
300 Watt VLT Series Inverter Owner’s Manual - 3 -
1 Introduction
Thank you for purchasing a Vanner 300 Watt VLT SERIES Inverter. We are confident that you will be
satisfied with the inverter’s performance and its many features. With proper installation and care, you can
look forward to years of service from this high performance product.
This document will describe the operation, technical specifications and installation procedures.
2 Important Safety Instructions
Electrocution hazard exists
Fire hazard exists
A potentially dangerous condition
Explosive hazard exists
Corrosive hazard exists
To get the most out of the power inverter, it must be installed and used properly. Please read the
instructions in this manual before installation. Keep this manual for future reference.
2.1.1 General Safety Precautions
Do not expose the inverter to rain, snow, spray, or dust. To reduce risk of hazard, do not obstruct
the ventilation openings. Do not install the inverter in a zero-clearance compartment. Overheating may
result.
To avoid a risk of fire and electric shock, make sure the wiring is in good electrical condition
and is proper gauge. Do not operate the inverter with damaged or substandard wiring.
This equipment contains components that can produce arc or sparks. To prevent fire or
explosion, do not install in compartments containing batteries or flammable materials or in locations which
require ignition protected equipment This includes any space containing gasoline-powered machinery,
fuel tanks, or joints, fittings, or other connection between components of the fuel system
To Next Page
Loading...
