After the WiFi connection is successful, click "+" when opening the APP for
the first time, add the camera model, and then the APP will automatically
connect to the camera and display the current real-time recording
situation of the camera.
Steps 4 APP Connection
Note:
If you do not connect to WiFi before opening the APP, the APP will
prompt you "Please connect to WiFi first", and will automatically jump to
the WiFi settings, please complete the steps to connect to WiFi first.
If the WiFi is already connected, but the APP jumps to the application
permission of the APP after selecting the model, please check whether
the wireless network permission of the APP is turned on.
1.
2.
- 11 -
To Next Page
Loading...
Need help?
General
