B. Motion Detection
When the motion detection is turned on, the icon will be displayed on
the recording interface, indicating that the dash cam is currently in
motion detection mode. Motion detection has three levels of low/medi-
um/high that can be adjusted, and the corresponding detection range
of motion detection is 6.6ft/13ft/19.7ft.
Note:
If the dash cam continues to be hit during the collision detection
recording, it will exit the collision detection mode and enter the normal
recording, restarting the 5-minute entry mechanism.
The collision detection video will be saved in the Normal folder. In order
to prevent the video from being looped, please check it in time and
save the required collision detection file to prevent loss.
1.
2.
the screen, and the camera automatically turn off. When the dash cam is
turned off, it will start to record for 1 minute after being shaken, and then
turn off the dash cam again.
- 22 -
To Next Page
Loading...
Need help?
General
