Vari BDR-595 E EuroAdela - Engine Oil Replacement; Table of Machine Lubrication

BDR-595 E EuroAdela
18
7.1.2 Engine oil replacement
See the guidelines for engine operation. To drain the oil, the machine should be either
inclined onto the side with the pour-in neck with oil gauge, or the engine should be
dismounted from the machine (see chapter 7.4 a,b,d).
7.1.3 Table of machine lubrication
Both swivel seatings of rotary lever in
the gearbox
min 1x a
month
yes
silicon oil in
atomizer
5.1
Tightening pulley arm pin (after
disassembling upper casing)
min 2x
yes
grease,
engine oil
5.2
Brake lever seating near the front belt
pulley (accessible after upper casing
disassembly)
min 2x yes
grease,
engine oil
5.3
Machine lubrication
During the
season
After the
season
Lubricant Figure
All cables
- input points to Bowdens
- output points from adjustment
bolts
min 2x
min 2x
yes
yes
silicon oil in
atomizer
-
Plug to pour oil into the
gearbox
Plug to drain oil from the gearbox
Figure 4: Oil plugs