BDR-620
2.5.8 Cover and machine disposal after its service life termination
You are required to carry out the package disposal after unwrapping the cutter, following national waste laws and regulations.
We recommend to follow these instructions when disposing of the machine after its service life termination:
➢ Dismount all machine parts that can still be used.
➢ Empty oil from gearbox and engine into an appropriate tank and hand it in at a collection point
60
.
➢ Dismount plastic and coloured metals.
➢ You are required to carry out the disposal of the dismantled machine remainder and dismounted parts, following national waste laws and
regulations.
2.5.9 Instructions for ordering spare parts
This user manual does not include a list of spare parts. The latest version of our catalogue can be downloaded from our web pages. If you do not have
Internet access, you can order the catalogue in printed form (against COD). In order to identify your machine properly you need to know its Type, Order
Number (CN°) and Identification Number (In°). These are given on the nameplate of your machine in the box, or in the warranty certificate. It is only
possible to find proper spare part designation with this information.
Field Description
Type Machine type designation. (BDR-620)
In° Unique manufacturer identification number. (1 0039 00 015)
CN° Business (order) number. (4263)
N° Serial number (next to year of manufacture). (00001/2009)
Tab. 8: Nameplate - example
2.6 Manufacturer address
VARI,a.s. Phone: (+420) 325 607 111
Opolanská 350 Fax: (+420) 325 607 264
Libice nad Cidlinou (+420) 325 637 550
289 07 Czech republic E-mail: vari@vari.cz
Web: http://www.vari.cz
60 Collection point information is given by responsible local office.
27
To Next Page
Loading...
Need help?
General
