INSTALLATION Series
4 Installation
WARNING
Unqualified personnel
Inappropriate handling may cause serious injury or property damage.
Only qualified personnel are allowed to carry out the described work.
NOTICE
Insufficient stability
Product will get damaged if it is not stabilized.
Assistant staff required to lift and stabilize the product during mounting.
4.1 Unpacking
Make sure that the supplied product is in accordance with your order.
• Inspect the quality of the supplied product visually. If it does not meet your
requirements, please contact VAT immediately.
• Store the original packaging material. It may be useful if the product must
be returned to VAT.
1. Cut plastic straps and open the transport box.
Remove plastic bag in a cleanroom only.
2. Open the plastic bag to unpack gate and actuator.
NOTICE
Sensitive product
Product will get damaged if not handled carefully.
Handle product with care: Do not touch solid objects when lifting the product
and place it down slowly and gently.
3. Place products on a clean surface.
To Next Page
Loading...
Need help?
General
